Universal Hardware Direct Ltd Architectural Ironmongery
Domestic Sliding Door Gear
Ball Race Gear Sliding Door Gear
Contract Quality
- Flush Pull 90mm x 40mm Aluminium
£0.60P including Vat each
Achitectural Quality
- Flush Pull 110mmx 50mm x 12mm Aluminium
£2.54P including Vat each
Ball Race Gear

Extra smooth running 'Ball Race action'.

A high quality durable system featuring steel ball bearings running in a heavy duty aluminium track.

The bottom channel fits to the door to leave the floor clear and provide easy access.

Use Ball Race for:

Converting an existing internal hinged door to a sliding door.

Fitting an internal door to an existing opening.

Doors up to 2'6" (762mm) use one 2'6" kit.

Doors up to 3'0" (914mm) use one 3'0" kit.

Double doors 2 x 3'0" (buy two kits)

Minimum door thickness 22mm (7/8")

Maximum door weight 35kg (77lbs)

NOTE: The Ballrace system should not be cut down to lengths in between 2'6" (762mm) and 3'0" (914mm). If your door opening is smaller than 3'0", but larger than 2'6" buy the 3'0" kit and position end stops included in the kit to allow the door to open/close properly.

Kit Contains

1 Top trackassembly including runner bar, 2 hangers, 2 guide peg,, 2 guide blocks, 2 end stops, 1 bottom channel, fixing screws, nuts & bolts

Tools Required
Screwdriver, 10mm Spanner, Hackshaw, Marker, Drill, Tape Measure

50-2010 - 762mm (2'6")
50-2020 - 914mm (3'0")

Email | Scheduling | Testimonials | Enquiry | Terms & Conditons | FAQ
Designed & Maintained By Universal Hardware Direct UK Ltd